Table of Contents
Are you worried about wearing a shirt that is too big will take the charm and elegance of your overall look? Do you want to know how to fix a shirt that is too big without sewing? This article of BestLifeTips is the best solution for you.
How to fix a shirt that is too big without sewing?
If you’re having a shirt that is too big for you, you can make it smaller right away without sewing. Here are some tips for how to fix a shirt that is too big without sewing.
How to fix a shirt that is too big without sewing by using coin trick?
For how to fix a shirt that is too big using coin trick, you will need a clear elastic and a coin. There are 2 ways to using coin trick.
- Create a gather to cinch your shirt
Step 1: Hold the coin against the outside of your shirt.
Step 2: Open the elastic with your other hand.
Step 3: Reach under your shirt, grab the coin with your elastic over fabric.
Step 4: Tie it twice or three times to make it tight enough to stay. You can repeat with one or two more coins if you want.
- Create a button to add character to your shirt
Step 1: Hold the coin against the inside of your shirt.
Step 2: Open the elastic with your other hand.
Step 3: Grab the coin from the outside with your elastic over fabric.
Step 4: Tie the elastic 2 or 3 times to make it tight enough to stay. You can repeat with one or two more coins to create a range of buttons.
You can refer to this video of Frump Fighters to see all the steps:
How to fix a shirt that is too big without sewing by thread and needle?
As for this method, you will need a ruler, pencil or chalk, pins, needle and thread. Then follow these easy steps for how to fix a shirt that is too big with thread and needle.
Step 1: Wear your shirt inside out to mark the lines, cut the seams, and hand stitch the fabric quickly and efficiently.
Step 2: Pinch the area of the fabric that you want to remove. You can use your fingers to pinch them while marking.
Step 3: Then, mark a line along the pinched area. Do not remove your hands while marking the line. Use a pencil or chalk to draw the lines instead.
Step 4: You shouldn’t taper the shirt too close to the body and add some seam allowance so that the shirt doesn’t get too tight to wear.
Step 5: Next, remove the shirt from your body and keep it on a flat surface. Take a ruler and a pencil or chalk to connect the marled lines properly. You can also use pins for thick fabric.
Step 6: Thread your needle. Take a thread whose color matches the color of your fabric.
Step 7: Hand-stitch the fabric along the marked lines on both sides. Start from the bottom to the sleeves for the perfect fit of your shirt. Make sure to stitch 2cm wide for strong and durable impact.
Step 8: Finally, cut off the excess fabric at the edges. Finish these raw edges, and your shirt is ready to fit.
How to fix a shirt that is too big without sewing by hem tape?
Using hem tape may not be a permanent solution, but it meets your urgent need.
Step 1: Wear your shirt inside out and pinch the area where you want to taper them.
Step 2: Use your hands to pinch out the area that you want to remove from your shirt. Make sure that there’s some slack left behind so that your shirt doesn’t become over-tight.
Step 3: Then, use a pencil or chalk to draw a line along the pinched area. If you’re adjusting a light-colored shirt, use the pencil. As for dark-colored shirts, use chalk to mark the pinched area.
Step 4: Remove the shirt and pin those marked areas for hemming. Make sure that you pin the fabric along the marked line vertically.
Step 5: Next, cut the excess fabric and add seam allowance for about half an inch and hem allowance. Ensure to cut the excess fabric precisely with no unravel threads.
Step 6: After that, fold the fabric along the hemline and use double-sided adhesive tape to join the two layers of fabric of the shirt along the pinned and folded area of the shirt.
Step 7: Lastly, iron the edges for a perfectly finished shirt.
How to fix a shirt that is too big without sewing by shrinking it?
Step 1: Determine the type of fabric your shirt is made of. Some fabrics shrink better than others. Shrinking may not work if the shirt has been washed before.
Step 2: Wash the shirt in hot water. Use a color-safe bleach to protect the clothing. The hot water will make the fabric shrink.
Step 3: Dry the shirt in the dryer in the hottest setting. Stop the dryer occasionally to check the size of the shirt to make sure that your shirt does not shrink too much.
Step 4: Iron your shirt with a hot steam iron if additional shrinking is needed.
How to fix a shirt that is too big without sewing by tying it?
Step 1: Tie back of the shirt using a ribbon to reduce the large size around the waist of the shirt, making it look like a fitted shirt.
Step 2: Determine the place where the size needs to be reduced the most on your shirt. You can tie the back right at the waist, or higher, under the chest.
Step 3: Poke two small holes in the shirt, one on each side. They should line up at the same height and be directly across from one another on each of your sides.
Step 4: Slide one end of a ribbon into one of the holes. The ribbon should be hanging down inside your shirt and one end remains out.
Step 5: String the ribbon inside your shirt around your back and to the inside of the second hole. Push the end of the ribbon through the hole.
Step 6: Pull the ends of the ribbon so that there is an even amount of ribbon sticking out from each side of your shirt. Tie the ends together behind your back, pull the shirt tight in the front.
How to fix a shirt that is too big without sewing by cutting it?
Step 1: Use scissor to cut off the sleeves of the shirt. Cut a V shape in the neck through both layers of it.
Step 2: Turn the shirt front-side down and lay it on a flat surface. Cut it in the point of the V down towards the bottom of the shirt until the back is cut completely in half.
Step 3: Make two horizontal cuts in the back of the shirt to create ties. The first cut is below the shoulders. The second one is at the lower back.
Step 4: Put the shirt on. Gather the top left and top right chunks of fabric and pull them tight. Tie them together in a knot. Repeat the ties with the middle and bottom chunks.
How to make a shirt shorter without sewing?
It’s not hard to make a shirt shorter without sewing. You can simply exchange it for a shorter one.
Also, you can choose the shrinking method to shrink it. Wash and tumble dry your shirt on the hottest settings. Most of the shirts shrink more vertically than they do horizontally.
If you’re in an urgent situation, use the hem tape or double-sided adhesive tape to make the shirt shorter.
You can also make a decorative knot. This works especially well for big shirts. The knot will make your shirt look cute and fashionable without sewing it.
Or if you’re not really good at doing this stuff, you can have a tailor cutting or hemming the shirt to shorten it.
How to make sleeves shorter without sewing?
Put the shirt on and mark the spot where you want to alter the sleeves. Then, measure about one inch down and mark the sleeve yet again.
After that, fold your shirt in half and pin it at the seams of the shoulder. This will help the seams to lay on top of each other. Finally, turn the sleeve and start hemming.
- How to get yellow stains out of clothes that have been stored
- How to wash an electric blanket
- Does 100 polyester shrink
Wearing a shirt that are too big is uncomfortable and makes you look untidy. You can apply one of the above tips on how to fix a shirt that is too big without sewing to make your shirt fitter. Come back to BestLifeTips for more helpful tips for your daily life.