Table of Contents

Apply These 5 Techniques to Fix a Screw Hole That Is Too Big
Home

Apply These 5 Techniques To Fix A Screw Hole That Is Too Big

If you are looking for a way on how to fix a screw hole that is too big, this article is for you. Discover different methods to solve this issue right here in this article of BestLifeTips.

We sometimes have a screw hole that expanded over time or we drilled a hole that ends up being too big on our walls. The problem is how to fix a screw hole that is too big? Read on this article of BestLifeTips to find out the solutions.

How to fix a screw hole that is too big?

How to fix a screw hole that is too big

Source: The Spruce

A common problem found in many homes is that the holes were drilled slightly too big for the screws to be used. Here are tips on how to fix a screw hole that is too big.

Use filler to fill the screw hole

If your pilot hole is too big, you can use the toothpick trick.

Step 1: Use liquid glue like wood glue or Elmer’s glue to fill the hole. Be careful with wood glue because it’s extremely powerful stuff.

Step 2: Fill the hole with toothpicks. Jam them in until they fill the entire hole.

Step 3: The hole is filled. You can now completely start fresh and re-drill the hole.

You can also use plastic anchor instead of toothpick. This is a great solution, but it’s not as good as the toothpick trick for hanging heavier things.

Relocate the screw

You can abandon the stretched-out hole and start with a new one. But there will be some extra work to fill the old hole.

Repair the hole with some spackle. While waiting for the spackle to dry, you can re-drill a pilot hole in a new area. Drill the new hole at least an inch away from the old one.

When the spackle has dried, sand, smooth, and repaint the old hole. You can continue with the spackling until the old one becomes flat and untextured.

Use larger screws

If you want to keep the hole where it is and do not want to re-fill it or use anchors, you can use a larger screw.

The advantage of this method is that it’s going to be more secure. A larger replacement screw will be more suitable for heavier objects or objects that must bear weight.

Use a hardwood plug

If you want to fill a hole in MDF or particleboard, use can use a hardwood plug. This is the most effective way in this case. You can buy hardwood plugs from most home improvement centers, hobby shops, or your local woodworking dealer.

How to fix a screw hole that is too big in drywall?

ow to fix a screw hole that is too big in drywall

Source: DIY Chatroom

Tips for how to fix a screw hole that is too big in drywall is not hard. Aside from relocating the screw hole and hiding the mistake behind whatever you’re fixing, you can also apply these methods:

Using toggle bolts

It’s not a good idea to glue in various items to plug the gap in drywall since the bond between the glue and the drywall won’t be strong enough. You can’t insert screws directly into drywall. The screw’s thread won’t cut a clean channel due to the fragile nature of drywall.

Therefore, a recommended solution is to use toggle bolts, which work by anchoring themselves to the back of the drywall.

Toggle bolts are also capable of supporting a great deal of weight.

Using a drywall repair kit

Another solution for how to fix a screw hole that is too big in drywall is to use a high-strength hole repair kit. This kit provides a professional finish capable of being painted over, and that can be screwed into once fully cured.

If you want to return the drywall to good as new before re-drilling the hole, this is probably the best choice.

These kits have everything you need to get started, including the rapid-setting compound, a self-adhesive patch, a putty knife, and sanding pad.

How to fix a screw hole that is too big in wood?

Fixing an oversized screw in wood is the easiest process. There are different ways for how to fix a screw hole that is too big in wood. Keep reading to see what they are.

How to fix a screw hole that is too big in wood

Source: Pinterest

Insert items to plug the gap

You can use toothpicks or matchsticks to insert to the hole. You can follow the same steps as using filler to fill the screw hole mentioned above.

Or you can use rawl plugs. When it comes to screw hole that is too big in wood, they can be an excellent choice to plug the hole before re-drilling.

For using rawl plugs, just coat the rawl plug in wood glue and insert it into the hole, then squeeze in some extra wood glue in the middle of the rawl plug for good measure. When it dries, drill a small pilot hole through the middle of the rawl plug before inserting the screw.

Wooden dowels are other good items to plug the gap. They will be able to hold more weight than matchsticks, toothpicks, or rawl plugs.

In most cases, you’ll need to widen the hole more to accommodate the width of the dowel. When the hole and dowel diameters match, insert wood glue into the hole before inserting the wooden dowel, leaving a small amount of the dowel poking out.

Once the wood glue has dried, cut the end of the dowel. Then drill a small pilot hole and then insert the screw.

Asides from the above filler items, you can use other items such as golf tees, nylon cable ties, steel wool, or a mix of toilet paper and wood glue.

Relocate the hole altogether

Perhaps the quickest and easiest, but least professional, option is to relocate the hole.

You could drill another hole in another place so that your DIY errors will be concealed.

This method is a minimum of hassle and allows you to complete the job more quickly.

How to fix a screw hole that is too big in plastic?

For fixing hole in plastic, the best choice is to use superglue. If your hole needs more filler material, shave a sliver of wood or toothpick down the hole before applying glue.

How to fix a screw hole that is too big in plastic

You can also use machine thread screws into plastic holes. Those selftappers are easy to over-tighten until hole strips.

In case your hole in plastic is not too big, you can use a glue for plastic model kit building. Place some drops on the screw or inside the hole, then tighten the screw into the hole twice. Let the screw inside the hole for at least 24 hours.

How to fix a screw hole that is too big in metal?

How to fix a screw hole that is too big in metal

Source: DoItYourself

Depending on the thickness of the metal, toggle bolts will probably be the best option for how to fix a screw hole that is too big in metal.

One such product to fix oversized holes in metal is SteelStik from J-B Weld. This is a hand-mixable, steel-reinforced epoxy putty that you can use on aluminum, brass, bronze, copper, iron, and stainless steel.

The product sets in between 3-5 minutes and can be painted and re-drilled after 1 hour to the correct size for your fixing.

See more:

Hope that this article about how to fix a screw hole that is too big can help you deal with oversized screw holes in your house. Please leave a comment below if you have any other method. Don’t forget to come back to BestLifeTips to get more useful tips.